The chemical K-2 is available in 3 forms as follows giving the same results. Application
of K-2 Passivation solution is a must after the application of all forms of K-2 chemical in order
to avoid further corrosion and contamination

 

It is used to clean large fabricated equipments of Stainless steel equipments vessels.
agitators, dryers, dairy machinery, fermentators, internals as well as the external of pipes
by a pressurized spray bottle or pump.



We provide special K-2 paste & K-2 spray for cleaning duplex and super duplex stainless steel.

Pickling And Passivation on DUPLEX AND SUPERDUPLEX Stainless Steel

 

Weld Cleaner

SURFACE INNOVATORS (SI) was promoted / incorporated in the year 1992 by Mrs. Anal Kulkarni and Mr. Anish Shah, both of them are having Diploma in Electroplating and Marketing from Mumbai University. Till yesteryears the products for pickling and passivation were not giving the desired quality finish and most importantly were hazardous to the human life due to the fumes evolved during the chemical reaction.

It is this which motivated promoting SI to provide a revolutionary pickling and passivation process to the Stainless Steel Industry which is not health hazardous (for the people using it) but also gives a uniform quality finish to the surface to match international standards. 

 
Weld Clean, Weld Seams Cleaning

Pickling Paste

It is used to clean weld seams and the areas surrounding the welds.

HOW TO APPLY K - 2 PASTE

1.  S1-56 - Degreaser (Removal of oil 50gm/lit.) Apply liquid S1-56 - Degreaser on to the surface for
     5- 10 minutes. Then wash the surface thoroughly with water.
2.  K-2 paste is to be applied on the weld seam and surrounding area with a brush.
3.  Leave the K-2 paste on the weld seam for 15-45 minutes depending on the thickness
      of the oxide scale.
4.  Scrub the surface with a plastic bristled brush and then wash surface thoroughly with water.
5.  Apply K-2 passivation on the surface and leave it for 10 – 15 minutes.
6.  Wash the surface thoroughly with water.

  K-2 PASTE FORM

    K-2 SPRAY FORM

The chemical K-2 is available in 3 forms as follows giving the same results. Application of K-2 Passivation solution is a must after the application of all forms of K-2 chemical in order to avoid further corrosion and contamination

 

It is used to clean large fabricated equipments of Stainless steel equipments vessels. agitators, dryers, dairy machinery, fermentators, internals as well as the external of pipes by a pressurized spray bottle or pump.

  K - 2 DIP FORM

    K - 2 Pickling Duplo

It is used to clean complicated items. like internal & external of pipes, wire rolls, internal recessed areas of machinery and Heavy Machinery by dipping into a huge tank by means of a chain pulley Or by circulation system

 

We provide special K-2 paste & K-2 spray for cleaning duplex and super duplex stainless steel. Pickling And Passivation on DUPLEX AND SUPERDUPLEX Stainless Steel

 
 
 
 
  K-2 Pickling Paste
  K-2 Pickling Spray
  K-2 Pickling Dip
  K-2 Pickling Duplo
  K-2 Passivation
  K-2 Carbochem
  K-2 SSA For bulk pickling
  K-2 400 Series
 

WHY TO PICKLE AND PASSIVATE ON STAINLESS STEEL

Pickling passivation ensures corrosion resistance to components of stainless steel and thus considerably influences their life and usefulness.   

 

Address :

G-2, Creative Industrial Estate, Plot No. 12, Next to H.P.Petrol Pump, N.M.Joshi Marg, Lower Parel, Mumbai - 400011. Maharashtra (INDIA)

Tel.: +91-22-2300 5205, 2309 7759
Fax.: +91-22-2309 9507

E-mail :

Also visit
k2picklingpaste.com stainlesssteelpassivation.net
picklingandpassivation.com

Designed & Hosted by : MID | Promoted by : GID